Cadillac CTSV Bolt Pattern, Center Bore & Wheel Offset (2003–2004)
Cadillac CTSV wheel fitment: 6x115 bolt pattern, 70.3mm center bore (2003–2004). OE wheel sizes and offsets for every CTSV variant we cover (2 guides), plus f
- 6x115bolt pattern (PCD)
- 70.3 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2003–2004
Cadillac CTSV wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2004 | Cadillac CTSV | 6x115 | 70.3 mm | 18x8.5J ET51 |
| 2003 | Cadillac CTSV with Accessories | 6x115 | 70.3 mm | 18x8.5J ET51 |
Factory wheel sizes on the Cadillac CTSV
Across the 2 Cadillac CTSV trims with a documented factory wheel, the OE diameter is 18 inch, width 8.5J and offset ET51. A forged wheel that keeps the 6x115 bolt pattern and the 70.3 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Cadillac CTSV (6x115, 70.3 mm Bore)
No other make in our database pairs 6x115 with a 70.3 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
6x115 is used by 0.1% of the vehicle entries in our database (7 of 6,503); 100.0% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Cadillac CTSV?
The Cadillac CTSV uses a 6x115 bolt pattern with a 70.3mm center bore across every CTSV variant in our database (2 guides, 2003–2004).
What is the Cadillac CTSV center bore?
The hub-centric center bore is 70.3 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Cadillac CTSV years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Cadillac CTSV?
Any wheel drilled 6x115 with a 70.3mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.