Alfa Romeo 166 Bolt Pattern, Center Bore & Wheel Offset (1998–2004)
Alfa Romeo 166 wheel fitment: 5x108 bolt pattern, 58.1mm center bore (1998–2004). OE wheel sizes and offsets for every 166 variant we cover (2 guides), plus f
- 5x108bolt pattern (PCD)
- 58.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 1998–2004
Alfa Romeo 166 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2004 | Alfa Romeo 166 | 5x108 | 58.1 mm | 16x6.5J |
| 1998 | Alfa Romeo 166 | 5x108 | 58.1 mm | 15x6.5J |
Factory wheel sizes on the Alfa Romeo 166
Across the 2 Alfa Romeo 166 trims with a documented factory wheel, the OE diameter is 15-16 inch, width 6.5J. A forged wheel that keeps the 5x108 bolt pattern and the 58.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Alfa Romeo 166 (5x108, 58.1 mm Bore)
In our database, 3 other Lancia entries use exactly the same 5x108 bolt pattern and 58.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle entries in our database (499 of 6,503); 1.0% of those also use a 58.1 mm center bore.
Hub-Centric Rings for a 58.1 mm Center Bore
A wheel with a center bore larger than 58.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 60.1 mm | 60.1 → 58.1 mm |
| 63.4 mm | 63.4 → 58.1 mm |
| 64.1 mm | 64.1 → 58.1 mm |
| 65.1 mm | 65.1 → 58.1 mm |
| 73.1 mm | 73.1 → 58.1 mm |
ANKUSI forged wheels are bored to exactly 58.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Alfa Romeo 166?
The Alfa Romeo 166 uses a 5x108 bolt pattern with a 58.1mm center bore across every 166 variant in our database (2 guides, 1998–2004).
What is the Alfa Romeo 166 center bore?
The hub-centric center bore is 58.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Alfa Romeo 166 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Alfa Romeo 166?
Any wheel drilled 5x108 with a 58.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.