Lotus Brushed Gunmetal 3-Spoke Forged Wheels
Monoblock · Brushed Gunmetal
2027 Lotus Emira 420 Sport Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Lotus Emira 420 Sport wheels? This page gives the 2027 Lotus Emira 420 Sport bolt pattern (5x114.3), centre bore, factory rim size and the offset range for aftermarket and forged Lotus Emira 420 Sport rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2027 Lotus Emira 420 Sport uses a 5x114.3 bolt pattern with a 68.1 mm centre bore and M12x1.5 lug bolts. For aftermarket wheels, 20x9J ET45 front / 20x11J ET40 rear sits flush.
Forged wheels for the 2027 Lotus Emira 420 Sport — drilled 5x114.3 with a 68.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Lotus Emira 420 Sport (2027): 5x114.3 bolt pattern, 68.1mm center bore, OE F 20x8.5J ET52 / R 20x10.5J ET47. Forged wheel fitment specs from ANKUSI.
Bolt Pattern5x114.3
Wheel Bolt/NutM12x1.5 Bolt
Center Bore68.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2027
Category5-Lug Performance / Tuner
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | F 20x9J ET45 / R 20x11J ET40 |
Forged Wheel Designs for the Lotus Emira 420 Sport
Every design below is forged to order, so it can be machined to the Lotus Emira 420 Sport's 5x114.3 bolt pattern and 68.1 mm center bore, with the width and offset calculated for your setup.
Lotus OEM-Style Gloss Black Directional Multi-Spoke Forged Wheels
Monoblock · Gloss Black
Gunmetal Directional Milled Forged Wheels
Monoblock · Gunmetal
Vossen HF-5-Style Bronze Forged Wheels
Replica · Bronze
Lotus OEM-Style Black / Machined Face Forged Wheels
Monoblock · Black Machined
Lotus OEM-Style Gloss Black 5 Split-Spoke Forged Wheels
Monoblock · Gloss Black
Vossen-Style Metallic Gray 10 Y-Spoke Forged Wheels
Monoblock · Metallic Gray
Belak-Style Black Machined Beadlock Milled-Ring Mesh Forged Drag Racing Wheels
Drag Racing · Black Machined
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.
The Lotus Emira 420 Sport ships from the factory on a 5x114.3 bolt pattern with a 68.1mm center bore and a F 20x8.5J ET52 / R 20x10.5J ET47 wheel. Our flush reference for the Lotus Emira 420 Sport is F 20x9J ET45 / R 20x11J ET40.; our maximum aggressive reference is F 21x9J ET40 / R 21x11.5J ET38. — beyond that, expect clearance issues against the fender liner without further modification.
Lotus Emira 420 Sport OE Wheel Specs
The Lotus Emira 420 Sport ships from the factory on 5x114.3 bolt pattern wheels with a 68.1mm center bore. The stock wheel size is F 20x8.5J ET52 / R 20x10.5J ET47, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Lotus Emira 420 Sport (2027) we drill the 5x114.3 pattern and cut the centre bore to 68.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 20x8.5J | ET52 | 6.80 in (173 mm) | — | — |
| Flush | 20x9J | ET45 | 6.77 in (172 mm) | −1 mm | +13 mm |
| Maximum | 21x9J | ET40 | 6.57 in (167 mm) | −6 mm | +18 mm |
Vehicles With the Same Hub as the Lotus Emira 420 Sport (5x114.3, 68.1 mm Bore)
In our database, 77 other vehicle entries from 5 makes use exactly the same 5x114.3 bolt pattern and 68.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle pages in our English fitment guide (1,300 of 6,503); 6.0% of those also use a 68.1 mm center bore.
Hub-Centric Rings for a 68.1 mm Center Bore
A wheel with a center bore larger than 68.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 68.1 mm |
| 70.5 mm | 70.5 → 68.1 mm |
| 71.6 mm | 71.6 → 68.1 mm |
| 72.6 mm | 72.6 → 68.1 mm |
| 73.1 mm | 73.1 → 68.1 mm |
ANKUSI forged wheels are bored to exactly 68.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Lotus Emira 420 Sport use?
The 2027 Lotus Emira 420 Sport uses a 5x114.3 bolt pattern.
How many lug bolts does the Lotus Emira 420 Sport use?
The Lotus Emira 420 Sport uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Lotus Emira 420 Sport?
The Lotus Emira 420 Sport's center bore is 68.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What does a flush wheel fitment look like on the Lotus Emira 420 Sport?
For a flush look with minimal to no rubbing, we recommend F 20x9J ET45 / R 20x11J ET40 as a starting point on a stock or mildly lowered Lotus Emira 420 Sport.
Do I need wheel spacers for my Lotus Emira 420 Sport?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Lotus Emira 420 Sport?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.77" backspacing up front and 7.57" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Lotus Emira 420 Sport?
Yes — the Lotus Emira 420 Sport's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 20x8.5 wheels · 20 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.