G70 Shooting Brake (2022) Wheel Fitment
G70 Shooting Brake (2022): 5x114.3 bolt pattern, 67.1mm center bore. Factory wheels: F 19x8.0J ET34 / R 19x8.5J ET46. Reference fitment ranges.
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F 19x8.0J ET34 / R 19x8.5J ET46 |
| Flush Fitment | F 19x8.5J ET28 / R 19x9.5J ET38 |
| Maximum Aggressive | F 20x9.0J ET25 / R 20x10.0J ET35 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
Genesis G70 Shooting Brake OE Wheel Specs
The 2022 Genesis G70 Shooting Brake (Wagon) uses a 5x114.3 bolt pattern with a 67.1mm center bore. Factory wheels are F 19x8.0J ET34 / R 19x8.5J ET46.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
Flush Fitment
For a flush look with minimal rubbing, F 19x8.5J ET28 / R 19x9.5J ET38 is the recommended starting point on a stock or mildly lowered Genesis G70 Shooting Brake.
Maximum Aggressive Fitment
F 20x9.0J ET25 / R 20x10.0J ET35 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Flush Fit (Conservative) F 19x8.5J ET28 / R 19x9.5J ET38
Recommended setup: F 19x8.5J ET28 / R 19x9.5J ET38 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $450-800 (wheels + tires + install)
B Comfortable Upgrade F 19x8.5J ET27 / R 19x9.5J ET37
Recommended setup: F 19x8.5J ET27 / R 19x9.5J ET37 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced F 20x9.0J ET27 / R 20x10.0J ET37
Recommended setup: F 20x9.0J ET27 / R 20x10.0J ET37 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive F 20x9.0J ET26 / R 20x10.0J ET36
Recommended setup: F 20x9.0J ET26 / R 20x10.0J ET36 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive F 20x9.0J ET25 / R 20x10.0J ET35
Recommended setup: F 20x9.0J ET25 / R 20x10.0J ET35 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | F 19x8.5J ET28 / R 19x9.5J ET38 | F 19x8.5J ET27 / R 19x9.5J ET37 | F 20x9.0J ET27 / R 20x10.0J ET37 | F 20x9.0J ET26 / R 20x10.0J ET36 | F 20x9.0J ET25 / R 20x10.0J ET35 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $450-800 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Flush Fit (Conservative))
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: F 19x8.5J ET28 / R 19x9.5J ET38
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: F 20x9.0J ET27 / R 20x10.0J ET37
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: F 20x9.0J ET25 / R 20x10.0J ET35
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE (F): 19x8.0J ET34 → ~5.84″ backspacing
- OE (R): 19x8.5J ET46 → ~6.56″ backspacing
- Flush (F): 19x8.5J ET28 → ~5.85″ backspacing
- Flush (R): 19x9.5J ET38 → ~6.75″ backspacing
- Max (F): 20x9.0J ET25 → ~5.98″ backspacing
- Max (R): 20x10.0J ET35 → ~6.88″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or can’t find your exact Genesis spec, or want a wheel built to a custom offset for your Genesis G70 Shooting Brake? Contact ANKUSI with your bolt pattern and offset target and we’ll confirm the correct forged wheel spec for your build.