Ford F-150 Lightning Platinum Black (2024) Bolt Pattern & Wheel Fitment
Ford F-150 Lightning Platinum Black (2024): 6x135 bolt pattern, 87.1mm center bore. Factory wheels: 22x9.5J F/R. Reference fitment ranges.
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 22x9.5J F/R |
| Flush Fitment | 22x10.5J at ET25 offset |
| Maximum Aggressive | 24x10.0J at ET20 offset |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Payload and towing figures on a truck are engineered around a specific unsprung mass budget at each corner. Forging lets ANKUSI hit the factory strength rating for the Ford F-150 Lightning Platinum Black at a lower rotational weight than an equivalent cast wheel, which is the more meaningful upgrade on a work-capable platform than diameter alone.
The Ford F-150 Lightning Platinum Black runs a 6x135 bolt pattern, 87.1mm center bore, and a 22x9.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 22x10.5J ET25, which tucks the tire under the fender lip on a stock-height Ford F-150 Lightning Platinum Black. Our Maximum Aggressive reference is 24x10.0J ET20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Ford F-150 Lightning Platinum Black OE Wheel Specs
The 2024 Ford F-150 Lightning Platinum Black (EV Pickup) uses a 6x135 bolt pattern with a 87.1mm center bore. Factory wheels are 22x9.5J F/R.
Why the factory spec works for most owners:
- Preserves the factory-tuned ride and steering feel
- A mainstream size for this segment, keeping tire choice wide and prices reasonable
- Leaves full clearance for the stock brakes and suspension hardware
- Keeps handling predictable and consistent in everyday conditions
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Ford F-150 Lightning Platinum Black (2024) we drill the 6x135 pattern and cut the centre bore to 87.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, F/R 22x10.5J ET25 is the recommended starting point on a stock or mildly lowered Ford F-150 Lightning Platinum Black.
Maximum Aggressive Fitment
F/R 24x10.0J ET20 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Factory-Style 22x9.5J ET44
Recommended setup: 22x9.5J ET44 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $450-800 (wheels + tires + install)
B Comfortable Upgrade 22x10.0J ET35
Recommended setup: 22x10.0J ET35 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit 22x10.5J ET25
Recommended setup: 22x10.5J ET25 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 24x10.5J ET23
Recommended setup: 24x10.5J ET23 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 24x10.0J ET20
Recommended setup: 24x10.0J ET20 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 22x9.5J ET44 | 22x10.0J ET35 | 22x10.5J ET25 | 24x10.5J ET23 | 24x10.0J ET20 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $450-800 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 22x9.5J ET44
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 22x10.5J ET25
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 24x10.0J ET20
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 22x9.5J ET44 → ~6.98″ backspacing
- Flush: 22x10.5J ET25 → ~6.73″ backspacing
- Max: 24x10.0J ET20 → ~6.29″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Ford spec, or want a wheel built to a custom offset for your Ford F-150 Lightning Platinum Black? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Ford F-150 Lightning Platinum Black (2024)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 6x135 pattern and the 87.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Ford orders on this platform land somewhere between the 22x10.5J ET25 flush setup and the 24x10.0J ET20 aggressive setup referenced above.
Designs we already tool for the 6x135 pattern — each one is re-cut to your sizes and offsets:
Ford Style Gloss Black 10-Spoke Forged Wheels – Ford Mustang / Ford F-150 Fitment (6-Lug)
Matte Silver Forged Wheels – Ford Mustang / Ford F-150 Fitment (6-Lug)
Matte Silver 6 Y-Spoke Side-Milled 6-Lug Off-Road Forged Wheels – Ford F-150 / Chevrolet Silverado Fitment (6-Lug)
Bronze 5 Y-Spoke Forged Wheels – Ford Mustang / Ford F-150 Fitment (6-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Ford F-150 Lightning Platinum Black use?
How many lug bolts does the Ford F-150 Lightning Platinum Black use?
What is the center bore size on the Ford F-150 Lightning Platinum Black?
What size are the factory (stock) wheels on the Ford F-150 Lightning Platinum Black?
What is the biggest wheel size I can fit on my Ford F-150 Lightning Platinum Black without rubbing?
What does a flush wheel fitment look like on the Ford F-150 Lightning Platinum Black?
Do I need wheel spacers for my Ford F-150 Lightning Platinum Black?
How do I calculate wheel backspacing for my Ford F-150 Lightning Platinum Black?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Ford F-150 Lightning Platinum Black?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x2.0, conical-seat lug nut.
Factory Torque Spec: 200 Nm (150 ft-lb). F-150 spec on M14x2.0 studs; confirm the exact figure for your specific model year, since Ford has revised this across generations.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.