Zeekr OEM-Style Gloss Black / Gunmetal / Gray 5-Spoke Forged Wheels
Zeekr 001 / 009 Fitment · 5-Lug
2021 Exeed LX Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Exeed LX wheels? This page gives the 2021 Exeed LX bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Exeed LX rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Exeed LX (2021): 5x108 bolt pattern, 60.1mm center bore. Factory wheels: 19x7J F/R. Aftermarket flush/max data coming soon.
Bolt Pattern5x108
Wheel Bolt/NutM12x1.5 Nut
Center Bore60.1mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Caliper TypeFactory caliper package (OEM)
Year2021
CategorySUV
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Forged wheels for the Exeed LXMachined to the 5x108 bolt pattern and 60.1 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
On a vehicle this heavy, the wheel is a structural part before it is a styling part - it carries the load, the brake heat and the cornering forces all at once. A forged wheel buys back unsprung weight without giving up the load rating an SUV actually needs, which is the one number most cast aftermarket wheels quietly fall short on.
We publish the factory specification for the Exeed LX below. We have not yet been able to verify aftermarket flush or maximum-aggressive offsets for this exact variant against a source we trust, so we are not listing any - an invented offset is worse than no offset when a wheel has to clear a caliper.
Exeed LX OE Wheel Specs
The 2021 Exeed LX (SUV) uses a 5x108 bolt pattern with a 60.1mm center bore. Factory wheels are 19x7J F/R.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Exeed LX (2021) we drill the 5x108 pattern and cut the centre bore to 60.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 6,436 vehicles, free to download, CC BY 4.0.
Aftermarket Fitment Data — Coming Soon
Published aftermarket fitment for this exact variant is still thin, so we have not committed to a flush or maximum-aggressive figure. Our engineering team is still collecting verified data for this variant. In the meantime the factory specification above is accurate and is the safe reference point for ordering.
Need a wheel for this car now? Contact ANKUSI with your target diameter, width and offset and our engineers will confirm the correct forged spec against your brake package before anything is cut. You can also use our Offset & Backspacing Calculator to work through the numbers yourself.
Custom Forged Wheels for the Exeed LX (2021)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x108 pattern and the 60.1mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose.
Designs we already tool for the 5x108 pattern — each one is re-cut to your sizes and offsets:
Land Rover Range Rover / Defender Forged Wheels – Gloss Black Directional Milled
Lynk & Co OEM-Style Brushed Silver Directional Forged Wheels – Lynk & Co 01 Fitment (5-Lug)
Porsche 911 / Panamera Forged Wheels – Gloss Black / Gunmetal / Gray 5 Y-Spoke
IM OEM-Style Gloss Black / Blue Lip 10 Y-Spoke Mesh Forged Wheels – IM L7 / LS7 Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Exeed LX use?
The 2021 Exeed LX uses a 5x108 bolt pattern.
How many lug bolts does the Exeed LX use?
The Exeed LX uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Exeed LX?
The Exeed LX's center bore is 60.1mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Exeed LX?
Factory wheels on the Exeed LX are 19x7J F/R.
Do I need wheel spacers for my Exeed LX?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Exeed LX?
The Exeed LX runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Forged Wheel Designs for the Exeed LX
Every design below is forged to order, so it can be machined to the Exeed LX's 5x108 bolt pattern and 60.1 mm center bore, with the width and offset calculated for your setup.
Forgiato Bright Silver Full-Face Forged Wheels
Lamborghini Urus / Land Rover Range Rover Fitment · 5-Lug
AITO OEM-Style Gloss Black Full-Face Forged Wheels
AITO M7 / M9 Fitment · 5-Lug
AITO OEM-Style Mirror Polished Slotted Dish Forged Wheels
AITO M7 / M9 Fitment · 5-Lug
Land Rover Range Rover / Defender Forged Wheels
Gloss Black 20-Spoke · 5-Lug
Jaguar F-Type / Land Rover Range Rover Forged Wheels
Transparent Gray 10 Y-Spoke Concave
Zeekr OEM-Style Matte Black Machined Petal Forged Wheels
Zeekr 007 / X Fitment · 5-Lug
Land Rover Range Rover / Defender Forged Wheels
Metallic Gray Cross-Spoke