← Fitment Guide · All Brabus Fitment Guides

2023 Brabus Crawler Wheels & Rims: Bolt Pattern, Offset & Sizes

Fitting Brabus Crawler wheels? This page gives the 2023 Brabus Crawler bolt pattern, centre bore, factory rim size and the offset range for aftermarket and forged Brabus Crawler rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.

Quick answer: The 2023 Brabus Crawler uses a 8-Lug bolt pattern with a 161 mm centre bore and M14x1.5 lug bolts. Factory wheels: 20x9.5J, front and rear. For aftermarket wheels, 20x10.0J ET-10 sits flush and 20x11.0J ET-20 is the most aggressive fit.

Forged wheels for the 2023 Brabus Crawler — drilled 8-Lug with a 161 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.

Get a quote for this car

WhatsApp the factory

Brabus Crawler (2023): 8-Lug bolt pattern, 161mm center bore. Factory wheels: 20x9.5J F/R. Reference fitment ranges.

Bolt Pattern8-Lug

Wheel Bolt/NutM14x1.5 Bolt

Center Bore161mm

Wheel Load Rating650–750 kg/wheel (Standard Passenger Car segment reference)

Year2023

CategoryDune Buggy

Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify

Use this spec on your site

Paste this code into a forum post, listing or web page to show the Brabus Crawler 2023 bolt pattern, center bore and factory wheel size. Free, no sign-up.

<iframe src="https://ankusiwheels.com/wp-content/uploads/ankusi-embed/lookup.html?vehicle=brabus-crawler-2023&card=1" width="100%" height="230" style="border:0;max-width:560px" loading="lazy" title="Brabus Crawler 2023 bolt pattern"></iframe>
<p style="font-size:13px"><a href="https://ankusiwheels.com/fitment-guide/brabus-crawler-2023/">Brabus Crawler 2023 bolt pattern and offset guide</a> by ANKUSI Wheels</p>

More free tools: bolt pattern lookup and offset calculator for your website.

Wheel Size & Offset at a Glance

Brabus Crawler wheel size and offset comparison by configuration
Configuration	Wheel Size & Offset
Flush Fitment	20x10.0J at ET-10 offset
Maximum Aggressive	20x11.0J at ET-20 offset

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter — Centerline, center bore, PCD, offset, width & diameter

Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline — Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

Most of the engineering value in a forged wheel over a cast one shows up in rotational mass, not outright strength — both can meet the same load rating, but the forged piece gets there lighter. On a sedan platform tuned for everyday balance, that weight saving is felt directly in steering response and ride quality.

The Brabus Crawler runs a 8-Lug bolt pattern, 161mm center bore, and a 20x9.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 20x10.0J ET-10, which tucks the tire under the fender lip on a stock-height Brabus Crawler. Our Maximum Aggressive reference is 20x11.0J ET-20 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.

Brabus Crawler OE Wheel Specs

The 2023 Brabus Crawler (Dune Buggy) uses a 8-Lug bolt pattern with a 161mm center bore. Factory wheels are 20x9.5J F/R.

Why the factory spec works for most owners:

Balances ride comfort with everyday drivability
A commonly used size for this vehicle class, supporting parts and tire availability
Maintains clearance for the factory suspension and brake components
Provides stable, predictable handling across normal driving conditions

ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Brabus Crawler (2023) we cut the centre bore to 161mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.

IATF 16949 & ISO 9001 certified · own 10,000-ton press in Guangzhou · from a single set to a full container

Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.

The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.

Offset & Backspacing Reference

Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):

OE: 20x9.5J ET0 → ~5.25″ backspacing
Flush: 20x10.0J ET-10 → ~5.11″ backspacing
Max: 20x11.0J ET-20 → ~5.21″ backspacing

Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Brabus spec, or want a wheel built to a custom offset for your Brabus Crawler? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.

Frequently Asked Questions

What is the center bore size on the Brabus Crawler?

The Brabus Crawler's center bore is 161mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.

What is the biggest wheel size I can fit on my Brabus Crawler without rubbing?

The most aggressive fitment we recommend without fender work is 20x11.0J at ET-20 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.

What does a flush wheel fitment look like on the Brabus Crawler?

For a flush look with minimal to no rubbing, we recommend 20x10.0J at ET-10 offset as a starting point on a stock or mildly lowered Brabus Crawler.

Do I need wheel spacers for my Brabus Crawler?

No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.

How do I calculate wheel backspacing for my Brabus Crawler?

Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.11" of backspacing.

What's the difference between wheel offset and backspacing?

Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.

Can I run staggered wheels (different sizes front and rear) on my Brabus Crawler?

The Brabus Crawler runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.

Sources and Last Update

Data checked against: avtoreference.com.

This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).

Other cars on the same factory size: 20x9.5 wheels · 20 inch wheels.

Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.

Last updated: 2026-09-18.

← Back to the full Fitment Guide · Browse forged wheels

Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.