2020 Brabus 800 Adventure XLP Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Brabus 800 Adventure XLP wheels? This page gives the 2020 Brabus 800 Adventure XLP bolt pattern, centre bore, factory rim size and the offset range for aftermarket and forged Brabus 800 Adventure XLP rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2020 Brabus 800 Adventure XLP uses a 8-Lug bolt pattern with a 161 mm centre bore and M14x1.5 lug bolts. Factory wheels: 22x9.5J, front and rear. For aftermarket wheels, 22x10.0J ET-15 sits flush and 22x11.0J ET-25 is the most aggressive fit.
Forged wheels for the 2020 Brabus 800 Adventure XLP — drilled 8-Lug with a 161 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Brabus 800 Adventure XLP (2020): 8-Lug bolt pattern, 161mm center bore. Factory wheels: 22x9.5J F/R. Reference fitment ranges.
Data check: the bolt pattern and center bore on this page have not yet been confirmed by a second independent source. Measure your hub or ask us before ordering. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Flush Fitment | 22x10.0J at ET-15 offset |
| Maximum Aggressive | 22x11.0J at ET-25 offset |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Payload and towing figures on a truck are engineered around a specific unsprung mass budget at each corner. Forging lets ANKUSI hit the factory strength rating for the Brabus 800 Adventure XLP at a lower rotational weight than an equivalent cast wheel, which is the more meaningful upgrade on a work-capable platform than diameter alone.
The Brabus 800 Adventure XLP runs a 8-Lug bolt pattern, 161mm center bore, and a 22x9.5J, front and rear, wheel from the factory. Our Flush Fitment reference is 22x10.0J ET-15, which tucks the tire under the fender lip on a stock-height Brabus 800 Adventure XLP. Our Maximum Aggressive reference is 22x11.0J ET-25 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Brabus 800 Adventure XLP OE Wheel Specs
The 2020 Brabus 800 Adventure XLP (Pickup) uses a 8-Lug bolt pattern with a 161mm center bore. Factory wheels are 22x9.5J F/R.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Brabus 800 Adventure XLP (2020) we cut the centre bore to 161mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 22x9.5J ET0 → ~5.25″ backspacing
- Flush: 22x10.0J ET-15 → ~4.91″ backspacing
- Max: 22x11.0J ET-25 → ~5.02″ backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Brabus spec, or want a wheel built to a custom offset for your Brabus 800 Adventure XLP? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What is the center bore size on the Brabus 800 Adventure XLP?
What is the biggest wheel size I can fit on my Brabus 800 Adventure XLP without rubbing?
What does a flush wheel fitment look like on the Brabus 800 Adventure XLP?
Do I need wheel spacers for my Brabus 800 Adventure XLP?
How do I calculate wheel backspacing for my Brabus 800 Adventure XLP?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Brabus 800 Adventure XLP?
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 22x9.5 wheels · 22 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Bolt pattern and center bore on this page come from published fitment references and are still awaiting a second independent check. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.