Custom Forged Wheels for the Rover 800 (4x114.3)
ANKUSI forges custom wheels for the Rover 800, drilled 4x114.3 with a 64.1 mm hub-centric bore, so no hub rings or adapters are needed. The factory wheel size in our database is 15x6J ET45 (model year 1996).
Recommended wheel sizes for the Rover 800
| Type | Size | Offset |
|---|---|---|
| Factory (OE) | 15x6J | ET45 |
| Flush | 17x7.5J | ET38 |
| Max | 18x8J | ET35 |
Flush and max sizes are recommendations from our fitment database; check real clearance on your car before ordering. See bolt pattern and center bore by year for the Rover 800
Vehicles With the Same Hub as the Rover 800 (4x114.3, 64.1 mm Bore)
In our database, 1 other Honda entries use exactly the same 4x114.3 bolt pattern and 64.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x114.3 is used by 0.6% of the vehicle entries in our database (41 of 6,503); 9.8% of those also use a 64.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 15x6J | ET45 | 5.27 in (134 mm) | — | — |
| Flush | 17x7.5J | ET38 | 5.75 in (146 mm) | +12 mm | +26 mm |
| Maximum | 18x8J | ET35 | 5.88 in (149 mm) | +15 mm | +35 mm |
Hub-Centric Rings for a 64.1 mm Center Bore
A wheel with a center bore larger than 64.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 65.1 mm | 65.1 → 64.1 mm |
| 66.1 mm | 66.1 → 64.1 mm |
| 66.6 mm | 66.6 → 64.1 mm |
| 67.1 mm | 67.1 → 64.1 mm |
| 73.1 mm | 73.1 → 64.1 mm |
ANKUSI forged wheels are bored to exactly 64.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
How to order
- Send your model, year and the size you want on WhatsApp.
- Our team confirms bolt pattern, center bore and offset for your car.
- The set is forged and machined to order in about 25 days, then shipped.
FAQ
How long do custom forged wheels for the Rover 800 take?
About 25 days of production after the specs are confirmed. Every wheel is drilled 4x114.3 with a 64.1 mm center bore.
What is the factory wheel size of the Rover 800?
The factory size in our database is 15x6J ET45. It can vary by trim, so check your exact car before ordering.
What wheel size fits the Rover 800 flush?
We recommend 17x7.5J ET38 for a flush fit and 18x8J ET35 as the maximum. Check clearance before ordering.