Mahindra Scorpio Bolt Pattern, Center Bore & Wheel Offset (2005–2020)
Mahindra Scorpio wheel fitment: 5x160 bolt pattern, 108mm center bore (2005–2020). OE wheel sizes and offsets for every Scorpio variant we cover (2 guides), p
- 5x160bolt pattern (PCD)
- 108 mmcenter bore
- Nutwheel bolt / nut
- 2 guidesmodel years 2005–2020
Mahindra Scorpio wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2020 | Mahindra Scorpio | 5x160 | 108 mm | 15x6.5J |
| 2005 | Mahindra Scorpio | 5x160 | 108 mm | 15x6.5J |
Factory wheel sizes on the Mahindra Scorpio
Across the 2 Mahindra Scorpio trims with a documented factory wheel, the OE diameter is 15 inch, width 6.5J. A forged wheel that keeps the 5x160 bolt pattern and the 108 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Mahindra Scorpio (5x160)
Get a quote for Mahindra Scorpio wheels
Vehicles With the Same Hub as the Mahindra Scorpio (5x160, 108 mm Bore)
No other make in our database pairs 5x160 with a 108 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x160 is used by <0.1% of the vehicle entries in our database (4 of 6,503); 25.0% of those also use a 108 mm center bore.
Hub-Centric Rings for a 108 mm Center Bore
A wheel with a center bore larger than 108 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 108.1 mm | 108.1 → 108 mm |
| 110.1 mm | 110.1 → 108 mm |
| 130.1 mm | 130.1 → 108 mm |
ANKUSI forged wheels are bored to exactly 108 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Mahindra Scorpio?
The Mahindra Scorpio uses a 5x160 bolt pattern with a 108mm center bore across every Scorpio variant in our database (2 guides, 2005–2020).
What is the Mahindra Scorpio center bore?
The hub-centric center bore is 108 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Mahindra Scorpio years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Mahindra Scorpio?
Any wheel drilled 5x160 with a 108mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.