Suzuki SX4 Bolt Pattern, Center Bore & Wheel Offset (2006–2021)
Suzuki SX4 wheel fitment: 5x114.3 bolt pattern, 60.1mm center bore (2006–2021). OE wheel sizes and offsets for every SX4 variant we cover (8 guides), plus flu
- 5x114.3bolt pattern (PCD)
- 60.1 mmcenter bore
- Nutwheel bolt / nut
- 8 guidesmodel years 2006–2021
Suzuki SX4 wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2021 | Suzuki SX4 | 5x114.3 | 60.1 mm | 16x6.5J |
| 2017 | Suzuki SX4 | 5x114.3 | 60.1 mm | 16x6.5J |
| 2016 | Suzuki SX4 | 5x114.3 | 60.1 mm | 16x6J |
| 2015 | Suzuki SX4 | 5x114.3 | 60.1 mm | 15x6J |
| 2013 | Suzuki SX4 | 5x114.3 | 60.1 mm | 16x6J |
| 2010 | Suzuki SX4 | 5x114.3 | 60.1 mm | 15x6J |
| 2009 | Suzuki SX4 | 5x114.3 | 60.1 mm | 14x5.5J |
| 2006 | Suzuki SX4 | 5x114.3 | 60.1 mm | 14x5.5J |
Factory wheel sizes on the Suzuki SX4
Across the 8 Suzuki SX4 trims with a documented factory wheel, the OE diameter is 14-16 inch, width 5.5-6.5J. A forged wheel that keeps the 5x114.3 bolt pattern and the 60.1 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Suzuki SX4 (5x114.3)
Get a quote for Suzuki SX4 wheels
Vehicles With the Same Hub as the Suzuki SX4 (5x114.3, 60.1 mm Bore)
In our database, 203 other vehicle entries from 18 makes use exactly the same 5x114.3 bolt pattern and 60.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x114.3 is used by 20.0% of the vehicle entries in our database (1,303 of 6,503); 16.7% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Suzuki SX4?
The Suzuki SX4 uses a 5x114.3 bolt pattern with a 60.1mm center bore across every SX4 variant in our database (8 guides, 2006–2021).
What is the Suzuki SX4 center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Suzuki SX4 years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Suzuki SX4?
Any wheel drilled 5x114.3 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.