Geely Otaka Bolt Pattern, Center Bore & Wheel Offset (2006–2009)
Geely Otaka wheel fitment: 4x100 bolt pattern, 60.1mm center bore (2006–2009). OE wheel sizes and offsets for every Otaka variant we cover (4 guides), plus fl
- 4x100bolt pattern (PCD)
- 60.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 4 guidesmodel years 2006–2009
Geely Otaka wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2009 | Geely Otaka | 4x100 | 60.1 mm | 14x5.5J |
| 2008 | Geely Otaka | 4x100 | 60.1 mm | 14x5.5J |
| 2007 | Geely Otaka | 4x100 | 60.1 mm | 14x5.5J |
| 2006 | Geely Otaka | 4x100 | 60.1 mm | 14x5.5J |
Forged wheels for the Geely Otaka (4x100)
Get a quote for Geely Otaka wheels
FAQ
What is the bolt pattern on a Geely Otaka?
The Geely Otaka uses a 4x100 bolt pattern with a 60.1mm center bore across every Otaka variant in our database (4 guides, 2006–2009).
What is the Geely Otaka center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Geely Otaka years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Geely Otaka?
Any wheel drilled 4x100 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.