Geely Monjaro Bolt Pattern, Center Bore & Wheel Offset (2021–2025)
Geely Monjaro wheel fitment: 5x108 bolt pattern, 63.4mm center bore (2021–2025).
- 5x108bolt pattern (PCD)
- 63.4 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 5 guidesmodel years 2021–2025
Geely Monjaro wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Geely Monjaro KX11 | 5x108 | 63.4 mm | 20x8J |
| 2024 | Geely Monjaro KX11 | 5x108 | 63.4 mm | 20x8J |
| 2023 | Geely Monjaro KX11 | 5x108 | 63.4 mm | 20x8J |
| 2022 | Geely Monjaro KX11 | 5x108 | 63.4 mm | 20x8J |
| 2021 | Geely Monjaro KX11 | 5x108 | 63.4 mm | 20x8J |
Factory wheel sizes on the Geely Monjaro
Across the 5 Geely Monjaro trims with a documented factory wheel, the OE diameter is 20 inch, width 8J. A forged wheel that keeps the 5x108 bolt pattern and the 63.4 mm hub bore and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Geely Monjaro (5x108)
Get a quote for Geely Monjaro wheels
Vehicles With the Same Hub as the Geely Monjaro (5x108, 63.4 mm Bore)
In our database, 263 other vehicle entries from 16 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 55.9% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Geely Monjaro?
The Geely Monjaro uses a 5x108 bolt pattern with a 63.4mm center bore across every Monjaro variant in our database (5 guides, 2021–2025).
What is the Geely Monjaro center bore?
The hub-centric center bore is 63.4 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Geely Monjaro years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Geely Monjaro?
Any wheel drilled 5x108 with a 63.4mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.



