Buick Lesabre Bolt Pattern, Center Bore & Wheel Offset (1965–2005)
Buick Lesabre wheel fitment: 5x127 bolt pattern, 70.3mm center bore (1965–1985); 5x115 bolt pattern, 70.3mm center bore (1992–2005). OE wheel sizes and offset
- 5x127bolt pattern (PCD), most common
- 70.3 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 35 guidesmodel years 1965–2005
Bolt pattern by generation
- 5x127, 70.3 mm center bore — 1965–1985 (21 variants)
- 5x115, 70.3 mm center bore — 1992–2005 (14 variants)
Buick Lesabre wheel specs by year and trim
Factory wheel sizes on the Buick Lesabre
Across the 35 Buick Lesabre trims with a documented factory wheel, the OE diameter is 15 inch, width 5.5-6J. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and matches the factory offset listed on the model page bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Vehicles With the Same Hub as the Buick Lesabre (5x127, 70.3 mm Bore)
No other make in our database pairs 5x127 with a 70.3 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
5x127 is used by 1.3% of the vehicle entries in our database (82 of 6,503); 4.9% of those also use a 70.3 mm center bore.
Hub-Centric Rings for a 70.3 mm Center Bore
A wheel with a center bore larger than 70.3 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.5 mm | 70.5 → 70.3 mm |
| 71.6 mm | 71.6 → 70.3 mm |
| 72.6 mm | 72.6 → 70.3 mm |
| 73.1 mm | 73.1 → 70.3 mm |
ANKUSI forged wheels are bored to exactly 70.3 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Buick Lesabre?
The Buick Lesabre uses a 5x127 bolt pattern on most variants we cover with a 70.3mm center bore. Other generations use 5x115 / 70.3mm (1992–2005). Always check the exact year and trim before ordering.
What is the Buick Lesabre center bore?
The hub-centric center bore is 70.3 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Buick Lesabre years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Buick Lesabre?
Any wheel drilled 5x127 with a 70.3mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.