Mitsubishi Colt Bolt Pattern, Center Bore & Wheel Offset (2005–2024)
Mitsubishi Colt wheel fitment: 4x114.3 bolt pattern, 67.1mm center bore (2005–2009); 4x100 bolt pattern, 60.1mm center bore. OE wheel sizes and offsets for ev
- 4x114.3bolt pattern (PCD), most common
- 67.1 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 5 guidesmodel years 2005–2024
Bolt pattern by generation
- 4x114.3, 67.1 mm center bore — 2005–2009 (4 variants)
- 4x100, 60.1 mm center bore — 2024 (1 variants)
Mitsubishi Colt wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2024 | Mitsubishi Colt | 4x100 | 60.1 mm | 16x6.5J ET42 |
| 2009 | Mitsubishi Colt 5-door | 4x114.3 | 67.1 mm | 15x6J ET46 |
| 2008 | Mitsubishi Colt CZT / CZ3 | 4x114.3 | 67.1 mm | 16x6.5J ET46 |
| 2007 | Mitsubishi Colt CZC / CZC Turbo | 4x114.3 | 67.1 mm | 15x6J ET46 |
| 2005 | Mitsubishi Colt Diesel / CZT / CZ3 / 5-door | 4x114.3 | 67.1 mm | 15x6J ET46 |
Factory wheel sizes on the Mitsubishi Colt
Across the 5 Mitsubishi Colt trims with a documented factory wheel, the OE diameter is 15-16 inch, width 6-6.5J and offset ET42-46. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Mitsubishi Colt (4x114.3)
Shop all Mitsubishi Colt forged wheels →
Get a quote for Mitsubishi Colt wheels
Vehicles With the Same Hub as the Mitsubishi Colt (4x114.3, 67.1 mm Bore)
In our database, 9 other vehicle entries from 3 makes use exactly the same 4x114.3 bolt pattern and 67.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
4x114.3 is used by 0.6% of the vehicle entries in our database (41 of 6,503); 31.7% of those also use a 67.1 mm center bore.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 15x6J | ET46 | 5.31 in (135 mm) | — | — |
| Flush | 16x7J | ET38 | 5.50 in (140 mm) | +5 mm | +21 mm |
| Maximum | 17x7.5J | ET35 | 5.63 in (143 mm) | +8 mm | +30 mm |
Hub-Centric Rings for a 67.1 mm Center Bore
A wheel with a center bore larger than 67.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 70.1 mm | 70.1 → 67.1 mm |
| 70.5 mm | 70.5 → 67.1 mm |
| 71.6 mm | 71.6 → 67.1 mm |
| 72.6 mm | 72.6 → 67.1 mm |
| 73.1 mm | 73.1 → 67.1 mm |
ANKUSI forged wheels are bored to exactly 67.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Mitsubishi Colt?
The Mitsubishi Colt uses a 4x114.3 bolt pattern on most variants we cover with a 67.1mm center bore. Other generations use 4x100 / 60.1mm (2024–2024). Always check the exact year and trim before ordering.
What is the Mitsubishi Colt center bore?
The hub-centric center bore is 67.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Mitsubishi Colt years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Mitsubishi Colt?
Any wheel drilled 4x114.3 with a 67.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.