Cadillac CT5-V Bolt Pattern, Center Bore & Wheel Offset (2020–2025)
Cadillac CT5-V wheel fitment: 5x120 bolt pattern, 66.9mm center bore (2020–2025). OE wheel sizes and offsets for every CT5-V variant we cover (2 guides), plus
- 5x120bolt pattern (PCD)
- 66.9 mmcenter bore
- M12x1.5 Nutwheel bolt / nut
- 2 guidesmodel years 2020–2025
Cadillac CT5-V wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2025 | Cadillac CT5-V | 5x120 | 66.9 mm | 19x8.5J ET35 |
| 2020 | Cadillac CT5-V | 5x120 | 66.9 mm | 19x8.5J |
Factory wheel sizes on the Cadillac CT5-V
Across the 2 Cadillac CT5-V trims with a documented factory wheel, the OE diameter is 19 inch, width 8.5J and offset ET35. A forged wheel that keeps the 5x120 bolt pattern and the 66.9 mm hub bore and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the Cadillac CT5-V (5x120)
Shop all Cadillac CT5-V forged wheels →
Get a quote for Cadillac CT5-V wheels
Vehicles With the Same Hub as the Cadillac CT5-V (5x120, 66.9 mm Bore)
In our database, 137 other vehicle entries from 9 makes use exactly the same 5x120 bolt pattern and 66.9 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x120 is used by 10.3% of the vehicle entries in our database (670 of 6,503); 24.2% of those also use a 66.9 mm center bore.
Hub-Centric Rings for a 66.9 mm Center Bore
A wheel with a center bore larger than 66.9 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.9 mm |
| 70.1 mm | 70.1 → 66.9 mm |
| 70.5 mm | 70.5 → 66.9 mm |
| 71.6 mm | 71.6 → 66.9 mm |
| 73.1 mm | 73.1 → 66.9 mm |
ANKUSI forged wheels are bored to exactly 66.9 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a Cadillac CT5-V?
The Cadillac CT5-V uses a 5x120 bolt pattern with a 66.9mm center bore across every CT5-V variant in our database (2 guides, 2020–2025).
What is the Cadillac CT5-V center bore?
The hub-centric center bore is 66.9 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Cadillac CT5-V years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Cadillac CT5-V?
Any wheel drilled 5x120 with a 66.9mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.