BMW M235i Bolt Pattern, Center Bore & Wheel Offset (2014–2020)
BMW M235i wheel fitment: 5x112 bolt pattern, 66.6mm center bore; 5x120 bolt pattern, 72.6mm center bore (2014–2015). OE wheel sizes and offsets for every M235
- 5x112bolt pattern (PCD), most common
- 66.6 mmcenter bore
- M12x1.5 Boltwheel bolt / nut
- 4 guidesmodel years 2014–2020
Bolt pattern by generation
- 5x112, 66.6 mm center bore — 2020 (2 variants)
- 5x120, 72.6 mm center bore — 2014–2015 (2 variants)
BMW M235i wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2020 | BMW M235i xDrive Gran Coupe F44 | 5x112 | 66.6 mm | 18x8.0J ET50 |
| 2020 | BMW M235i xDrive Gran Coupe F44 [UK] | 5x112 | 66.6 mm | 18x8.0J ET50 |
| 2015 | BMW M235i Convertible F23 | 5x120 | 72.6 mm | 18x7.5J |
| 2014 | BMW M235i Coupe F22 | 5x120 | 72.6 mm | 18x7.5J |
Factory wheel sizes on the BMW M235i
Across the 4 BMW M235i trims with a documented factory wheel, the OE diameter is 18 inch, width 7.5-8J and offset ET50. A forged wheel that keeps the bolt pattern and hub bore of your generation (see the table above) and stays inside that offset range bolts on without spacers or hub rings. Going one inch up in diameter with a lower-profile tyre keeps the rolling circumference inside the usual 1.5% tolerance; every extra 0.5J of width moves the outer lip about 6 mm outward at the same offset, and each 5 mm less offset moves the whole wheel 5 mm outward.
Forged wheels for the BMW M235i (5x112)
Shop all BMW M235i forged wheels →
Get a quote for BMW M235i wheels
Vehicles With the Same Hub as the BMW M235i (5x112, 66.6 mm Bore)
In our database, 632 other vehicle entries from 20 makes use exactly the same 5x112 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.7% of the vehicle entries in our database (1,410 of 6,503); 58.7% of those also use a 66.6 mm center bore.
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
FAQ
What is the bolt pattern on a BMW M235i?
The BMW M235i uses a 5x112 bolt pattern on most variants we cover with a 66.6mm center bore. Other generations use 5x120 / 72.6mm (2014–2015). Always check the exact year and trim before ordering.
What is the BMW M235i center bore?
The hub-centric center bore is 66.6 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all BMW M235i years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the BMW M235i?
Any wheel drilled 5x112 with a 66.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.