Tank 300 / 500 Off-Road 6-Lug Forged Wheels
Gloss White Custom
Tank Wheel Fitment Guide
6 fitment guides for Tank, covering 2023 to 2026, built around the 6x139.7 bolt pattern. Browse the full list below, then open a model for bolt pattern, center bore, OE offset, flush and max wheel sizes, and offset/backspacing conversions.
Tank models: bolt pattern by model
Tank Bolt Pattern & Center Bore Notes
Every Tank model we currently cover uses the same 6x139.7 bolt pattern with a 100.1mm center bore. As we add more Tank model years to this guide we will flag any generation that changes this here — always double-check the specific model page below since older or international-market versions can differ.
Offset and backspacing recommendations vary by trim even within the same bolt pattern, mainly due to differences in brake caliper size and suspension geometry between base and performance trims. Every ANKUSI wheel is forged to your exact target offset, so send us your Tank model, year, and trim and we will confirm the correct spec before production — no guessing required.
How to check the bolt pattern on your Tank
The most common Tank fitment in our guide is 6x139.7 with a 100.1 mm center bore (6 of 6 model years we cover).
- Read the stamping on the back of an original wheel: size, offset (ET) and bolt pattern are usually cast into a spoke or the hub pad.
- No stamping? Measure center-to-center between two adjacent lug holes. For 6x139.7 that distance is 69.9 mm (PCD × sin(180° / 6)). A 2 mm difference already means a different bolt pattern.
- Match generation and year on the model pages below — the same nameplate can change bolt pattern or center bore between generations.
Changing width or offset? Check how far the wheel moves in or out with our offset & backspacing calculator.
400 (3)
Forged Wheels for Tank
Forged-to-order wheel designs matched to Tank bolt patterns. Every set is machined to your exact model, offset and center bore.
Tank OEM-Style Custom Finish Beadlock Forged Wheels
Tank 300 / 500 Fitment · 6-Lug
Tank 300 / 500 Off-Road 6-Lug Forged Wheels
Gloss Black Multi-Spoke
Tank OEM-Style Matte Silver 6 Y-Spoke Off-Road Forged Wheels
Tank 300 / 500 Fitment · 6-Lug
Tank 300 / 500 Off-Road 6-Lug Forged Wheels
White / Black
Tank 300 / 500 Off-Road 6-Lug Forged Wheels
Matte Gray Petal
Tank OEM-Style Matte Black Slotted Dish Polished Lip Off-Road Forged Wheels
Tank 300 / 500 Fitment · 6-Lug
Tank 300 / 500 Off-Road 6-Lug Forged Wheels
Gloss Black Multi-Spoke Turbine
Vehicles Using 6x139.7 With a 100.1 mm Center Bore
In our database, 16 other vehicle entries from 7 makes use exactly the same 6x139.7 bolt pattern and 100.1 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
6x139.7 is used by 4.0% of the vehicle pages in our English fitment guide (258 of 6,503); 8.5% of those also use a 100.1 mm center bore.
Hub-Centric Rings for a 100.1 mm Center Bore
A wheel with a center bore larger than 100.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 106.1 mm | 106.1 → 100.1 mm |
| 108.1 mm | 108.1 → 100.1 mm |
| 110.1 mm | 110.1 → 100.1 mm |
| 130.1 mm | 130.1 → 100.1 mm |
ANKUSI forged wheels are bored to exactly 100.1 mm for this vehicle, so no ring is needed.
Sources and Last Update
Bolt pattern and center bore were checked against at least two independent fitment references before publication.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.