Volvo OEM-Style Custom Finish Split Machined Face Forged Wheels
Monoblock · Custom Finish
2014 Volvo XC60 Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Volvo XC60 wheels? This page gives the 2014 Volvo XC60 bolt pattern (5x108), centre bore, factory rim size and the offset range for aftermarket and forged Volvo XC60 rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2014 Volvo XC60 uses a 5x108 bolt pattern with a 63.4 mm centre bore and M14x1.5 lug bolts. Factory wheels: 17x7.5J at ET52.5. For aftermarket wheels, 19x8J ET38 sits flush and 20x8.5J ET35 is the most aggressive fit.
Forged wheels for the 2014 Volvo XC60 — drilled 5x108 with a 63.4 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Volvo XC60 (2014): 5x108 bolt pattern, 63.4mm center bore. Factory wheels: 17x7.5J. Reference fitment ranges.
Bolt Pattern5x108
Wheel Bolt/NutM14x1.5 Bolt
Center Bore63.4mm
Wheel Load Rating900–1250 kg/wheel (SUV segment reference)
Year2014
CategoryLuxury SUV
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 17x7.5J at ET52.5 |
| Flush Fitment | 19x8J at ET38 offset |
| Maximum Aggressive | 20x8.5J at ET35 offset |
Forged Wheel Designs for the Volvo XC60
Every design below is forged to order, so it can be machined to the Volvo XC60's 5x108 bolt pattern and 63.4 mm center bore, with the width and offset calculated for your setup.
Volvo OEM-Style Gloss Black / Machined Multi-Spoke Forged Wheels
Monoblock · Gloss Black / Machined
Metallic Gray 10-Spoke Forged Wheels
Monoblock · Metallic Gray
Gloss White Round-Hole Disc Black Lip Forged Wheels
Deep Dish · Gloss White
Matte Silver Split-Spoke Machined Face Forged Wheels
Monoblock · Matte Silver
Gunmetal Machined Face Forged Wheels
Monoblock · Gunmetal
Volvo S60 T8 Polestar Engineered Forged Wheels
Monoblock · Gloss Black
Matte Silver 5-Spoke Forged Wheels
Monoblock · Matte Silver
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Volvo XC60's factory suspension tuning already accounts for a specific unsprung mass target. Forged construction lets ANKUSI match the factory strength spec while keeping rotational weight down, which is where the real handling benefit comes from on a taller, heavier SUV platform.
The Volvo XC60 runs a 5x108 bolt pattern, 63.4mm center bore, and a 17x7.5J at ET52.5, front and rear, wheel from the factory. Our Flush Fitment reference is 19x8J ET38, which tucks the tire under the fender lip on a stock-height Volvo XC60. Our Maximum Aggressive reference is 20x8.5J ET35 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Volvo XC60 OE Wheel Specs
The 2014 Volvo XC60 (Luxury SUV) uses a 5x108 bolt pattern with a 63.4mm center bore. Factory wheels are 17x7.5J at ET52.5.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Volvo XC60 (2014) we drill the 5x108 pattern and cut the centre bore to 63.4mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 17x7.5J ET52.5 → ~6.32″ backspacing
- Flush: 19x8J ET38 → ~6.0″ backspacing
- Max: 20x8.5J ET35 → ~6.13″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Volvo spec, or want a wheel built to a custom offset for your Volvo XC60? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Volvo XC60: Specs by Model Year
Vehicles With the Same Hub as the Volvo XC60 (5x108, 63.4 mm Bore)
In our database, 276 other vehicle entries from 17 makes use exactly the same 5x108 bolt pattern and 63.4 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x108 is used by 7.7% of the vehicle pages in our English fitment guide (499 of 6,503); 55.9% of those also use a 63.4 mm center bore.
Hub-Centric Rings for a 63.4 mm Center Bore
A wheel with a center bore larger than 63.4 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 64.1 mm | 64.1 → 63.4 mm |
| 65.1 mm | 65.1 → 63.4 mm |
| 66.1 mm | 66.1 → 63.4 mm |
| 66.6 mm | 66.6 → 63.4 mm |
| 73.1 mm | 73.1 → 63.4 mm |
ANKUSI forged wheels are bored to exactly 63.4 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Volvo XC60 use?
The 2014 Volvo XC60 uses a 5x108 bolt pattern.
How many lug bolts does the Volvo XC60 use?
The Volvo XC60 uses a 5-lug bolt pattern (5x108), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Volvo XC60?
The Volvo XC60's center bore is 63.4mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Volvo XC60?
Factory wheels on the Volvo XC60 are 17x7.5J at ET52.5.
What is the biggest wheel size I can fit on my Volvo XC60 without rubbing?
The most aggressive fitment we recommend without fender work is 20x8.5J at ET35 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Volvo XC60?
For a flush look with minimal to no rubbing, we recommend 19x8J at ET38 offset as a starting point on a stock or mildly lowered Volvo XC60.
Do I need wheel spacers for my Volvo XC60?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Volvo XC60?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Volvo XC60?
The Volvo XC60 runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 17x7.5 wheels · 17 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.