Mini OEM-Style Gloss Black Directional Machined Face Forged Wheels
Mini Countryman / Paceman ALL4 Fitment · 5-Lug
2025 Mini Aceman SE Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Mini Aceman SE wheels? This page gives the 2025 Mini Aceman SE bolt pattern (5x112), centre bore, factory rim size and the offset range for aftermarket and forged Mini Aceman SE rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2025 Mini Aceman SE uses a 5x112 bolt pattern with a 66.6 mm centre bore and M14x1.25 lug bolts. Factory wheels: 19x8J at ET42. For aftermarket wheels, 20x8.5J ET35 sits flush and 20x9J ET32 is the most aggressive fit.
Forged wheels for the 2025 Mini Aceman SE — drilled 5x112 with a 66.6 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in about 25 days.
Get a quote for this car
Mini Aceman SE (2025): 5x112 bolt pattern, 66.6mm center bore. Factory wheels: 19x8J. Reference fitment ranges.
Bolt Pattern5x112
Wheel Bolt/NutM14x1.25 Bolt
Center Bore66.6mm
Wheel Load Rating920–1093 kg/wheel (Crossover segment reference)
Year2025
CategoryEV Crossover
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Built to order by ANKUSI — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 19x8J at ET42 |
| Flush Fitment | 20x8.5J at ET35 offset |
| Maximum Aggressive | 20x9J at ET32 offset |
Forged wheels for the Mini Aceman SEMachined to the 5x112 bolt pattern and 66.6 mm bore · 14–24 inch · offset calculated for your car · 3D drawing before production
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Mini Aceman SE runs a 5x112 bolt pattern, 66.6mm center bore, and a 19x8J at ET42, front and rear, wheel from the factory. Our Flush Fitment reference is 20x8.5J ET35, which tucks the tire under the fender lip on a stock-height Mini Aceman SE. Our Maximum Aggressive reference is 20x9J ET32 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Mini Aceman SE OE Wheel Specs
The 2025 Mini Aceman SE (EV Crossover) uses a 5x112 bolt pattern with a 66.6mm center bore. Factory wheels are 19x8J at ET42.
Why the factory spec works for most owners:
- Supports the vehicle's curb weight and load capacity
- Preserves ground clearance for everyday and light off-road use
- Balances ride comfort with cargo and passenger stability
- Maintains clearance for the factory suspension travel and brake package
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Mini Aceman SE (2025) we drill the 5x112 pattern and cut the centre bore to 66.6mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Flush Fitment
For a flush look with minimal rubbing, 20x8.5J ET35 is the recommended starting point on a stock or mildly lowered Mini Aceman SE.
Maximum Aggressive Fitment
20x9J ET32 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
Real-World Fitment Notes
KW V3 EV coilovers; 20x8.5J ET35 BBS CI-R wheels; regenerative brakes; Continental SportContact 7 235/40 R20 tires. Note: Higher-output electric crossover featuring dual-screen interior layout.
5-Tier Configuration Options
A Factory-Style 19x8.0J ET42
Recommended setup: 19x8.0J ET42 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,200-1,500 (wheels + tires + install)
B Comfortable Upgrade 20x8.5J ET39
Recommended setup: 20x8.5J ET39 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit 20x8.5J ET35
Recommended setup: 20x8.5J ET35 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive 20x9.0J ET34
Recommended setup: 20x9.0J ET34 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive 20x9.0J ET32
Recommended setup: 20x9.0J ET32 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | 19x8.0J ET42 | 20x8.5J ET39 | 20x8.5J ET35 | 20x9.0J ET34 | 20x9.0J ET32 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $1,200-1,500 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: 19x8.0J ET42
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: 20x8.5J ET35
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: 20x9.0J ET32
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
1
What's your primary use? Daily commuting → Tier A/B. Weekend street driving → Tier B/C. Show or occasional track use → Tier D/E.
2
What's your budget? Under $800 → Tier A. $800-3,400 → Tier B/C. $3,400+ → Tier D/E.
3
How much does fuel economy matter? Very important → Tier A. Somewhat important → Tier B/C. Not a priority → Tier D/E.
4
Still unsure? Tier C (Balanced / Flush Fit) is the default choice for most Mini Aceman SE owners.
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: 19x8J ET42 → ~6.15″ backspacing
- Flush: 20x8.5J ET35 → ~6.13″ backspacing
- Max: 20x9J ET32 → ~6.26″ backspacing
A Note on Clearance
Final clearance depends on the exact tire model, suspension height, brake package, alignment and vehicle tolerances. A physical test fit is recommended before production.
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Mini spec, or want a wheel built to a custom offset for your Mini Aceman SE? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Custom Forged Wheels for the Mini Aceman SE (2025)
Everything above is reference data. If you want wheels actually built to it, that is what ANKUSI does: we are a forged wheel factory in Guangzhou, China, IATF 16949 and ISO 9001 certified, forging on our own 10,000-ton press and producing over 120,000 wheels a year. Forging blank, CNC machining, finishing, coating and inspection all happen in the same building — nothing is subcontracted and nothing is relabelled from another manufacturer.
Every set is cut to order, so the 5x112 pattern and the 66.6mm centre bore are machined for this car specifically rather than shimmed with adaptor rings. Diameter, width, offset, concavity, monoblock or multi-piece construction and the finish are all yours to choose — most Mini orders on this platform land somewhere between the 20x8.5J ET35 flush setup and the 20x9J ET32 aggressive setup referenced above.
Designs we already tool for the 5x112 pattern — each one is re-cut to your sizes and offsets:
Mini OEM-Style Brushed Silver 10-Spoke Forged Wheels – Mini Countryman / Paceman ALL4 Fitment (5-Lug)
Mini OEM-Style Bronze Deep Lip Forged Wheels – Mini Cooper / Clubman ALL4 Fitment (5-Lug)
Mini OEM-Style Gloss Black Directional Machined Face Forged Wheels – Mini Countryman / Paceman ALL4 Fitment (5-Lug)
Mini OEM-Style Gloss Black 10-Spoke Forged Wheels – Mini Cooper / Clubman Fitment (5-Lug)Frequently Asked Questions
What bolt pattern (PCD) does the Mini Aceman SE use?
The 2025 Mini Aceman SE uses a 5x112 bolt pattern.
How many lug bolts does the Mini Aceman SE use?
The Mini Aceman SE uses a 5-lug bolt pattern (5x112), so you need a 5-lug forged wheel to bolt straight on.
What is the center bore size on the Mini Aceman SE?
The Mini Aceman SE's center bore is 66.6mm. If an aftermarket wheel has a larger center bore than this, hub-centric rings are recommended so the wheel centers on the hub itself rather than relying on the lug bolts alone.
What size are the factory (stock) wheels on the Mini Aceman SE?
Factory wheels on the Mini Aceman SE are 19x8J at ET42.
What is the biggest wheel size I can fit on my Mini Aceman SE without rubbing?
The most aggressive fitment we recommend without fender work is 20x9J at ET32 offset. Going beyond this typically causes rubbing under compression unless you roll the fenders or add camber correction.
What does a flush wheel fitment look like on the Mini Aceman SE?
For a flush look with minimal to no rubbing, we recommend 20x8.5J at ET35 offset as a starting point on a stock or mildly lowered Mini Aceman SE.
Do I need wheel spacers for my Mini Aceman SE?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Mini Aceman SE?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 6.13" of backspacing.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Mini Aceman SE?
The Mini Aceman SE runs the same wheel size front and rear from the factory, so staggered fitment is not required. ANKUSI can still forge a staggered set (wider rear) on request if you want a more aggressive stance.
Vehicles With the Same Hub as the Mini Aceman SE (5x112, 66.6 mm Bore)
In our database, 823 other vehicle entries from 21 makes use exactly the same 5x112 bolt pattern and 66.6 mm center bore. Factory wheels from these cars bolt on and center on the hub without rings; offset and width still have to be checked.
5x112 is used by 21.6% of the vehicle pages in our English fitment guide (1,407 of 6,503); 58.6% of those also use a 66.6 mm center bore.
Hub-Centric Rings for a 66.6 mm Center Bore
A wheel with a center bore larger than 66.6 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 67.1 mm | 67.1 → 66.6 mm |
| 70.1 mm | 70.1 → 66.6 mm |
| 70.5 mm | 70.5 → 66.6 mm |
| 71.6 mm | 71.6 → 66.6 mm |
| 73.1 mm | 73.1 → 66.6 mm |
ANKUSI forged wheels are bored to exactly 66.6 mm for this vehicle, so no ring is needed.
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 19x8 wheels · 19 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.
Forged Wheel Designs for the Mini Aceman SE
Every design below is forged to order, so it can be machined to the Mini Aceman SE's 5x112 bolt pattern and 66.6 mm center bore, with the width and offset calculated for your setup.
Mini OEM-Style Gloss Black 10-Spoke Forged Wheels
Mini Cooper / Clubman Fitment · 5-Lug
BMW M2 G87 / M3 G80 Forged Wheels
Gloss Black 10 Y-Spoke Side-Milled
Audi A6 / A4 Forged Wheels
Matte Silver 5-Spoke
Mini OEM-Style Brushed Silver 10-Spoke Forged Wheels
Mini Countryman / Paceman ALL4 Fitment · 5-Lug
Mini OEM-Style Bronze Deep Lip Forged Wheels
Mini Cooper / Clubman ALL4 Fitment · 5-Lug
Audi A6 / BMW 5 Series Forged Wheels
Transparent Gold Petal-Spoke
BMW M3 / Audi RS5 Forged Wheels
Gloss White 10-Spoke Racing
Bolt pattern and center bore on this page were cross-checked against at least two independent sources before publication. Last reviewed 2026-09-18. Spotted an error? Email info@ankusi.com and we will verify and correct it.