Mercedes-Benz CL65 AMG [UK] (2008) Wheel Fitment
Mercedes-Benz CL65 AMG [UK] (2008): 5x112 bolt pattern, 66.6mm center bore. Factory wheels: F: 19x8.5J R: 19x9.5J. Reference fitment ranges.
✓ Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x8.5J R: 19x9.5J |
| Flush Fitment | F 20x9.0J ET30 / R 20x10.0J ET35 |
| Maximum Aggressive | F 21x9.5J ET25 / R 21x10.5J ET30 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
The Mercedes-Benz CL65 AMG [UK]'s chassis tuning assumes a certain amount of rotational mass at each corner. Forging lets ANKUSI cut that mass while matching the factory strength rating, which sharpens turn-in and reduces the energy the brakes have to absorb — a real gain on a coupe platform, not just a styling change.
The Mercedes-Benz CL65 AMG [UK] runs a 5x112 bolt pattern, 66.6mm center bore, and a F: 19x8.5J wheel from the factory. Our Flush Fitment reference is F 20x9.0J ET30 / R 20x10.0J ET35, which tucks the tire under the fender lip on a stock-height Mercedes-Benz CL65 AMG [UK]. Our Maximum Aggressive reference is F 21x9.5J ET25 / R 21x10.5J ET30 — beyond that offset, expect rubbing against the inner fender liner under compression without further trimming.
Mercedes-Benz CL65 AMG [UK] OE Wheel Specs
The 2008 Mercedes-Benz CL65 AMG [UK] (Performance Coupe) uses a 5x112 bolt pattern with a 66.6mm center bore. Factory wheels are F: 19x8.5J R: 19x9.5J.
Why the factory spec works for most owners:
- Keeps unsprung weight low to preserve the factory handling balance
- Matches the wider, performance-oriented tire sizing typical of this platform
- Maintains clearance for the factory brake package and suspension geometry
- Balances grip with ride comfort for daily and spirited driving
Flush Fitment
For a flush look with minimal rubbing, F 20x9.0J ET30 / R 20x10.0J ET35 is the recommended starting point on a stock or mildly lowered Mercedes-Benz CL65 AMG [UK].
Maximum Aggressive Fitment
F 21x9.5J ET25 / R 21x10.5J ET30 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Factory-Style F 19x8.5J ET43 / R 19x9.5J ET43
Recommended setup: F 19x8.5J ET43 / R 19x9.5J ET43 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $450-800 (wheels + tires + install)
B Comfortable Upgrade F 20x9.0J ET37 / R 20x10.0J ET39
Recommended setup: F 20x9.0J ET37 / R 20x10.0J ET39 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit F 20x9.0J ET30 / R 20x10.0J ET35
Recommended setup: F 20x9.0J ET30 / R 20x10.0J ET35 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive F 21x9.5J ET28 / R 21x10.5J ET33
Recommended setup: F 21x9.5J ET28 / R 21x10.5J ET33 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive F 21x9.5J ET25 / R 21x10.5J ET30
Recommended setup: F 21x9.5J ET25 / R 21x10.5J ET30 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | F 19x8.5J ET43 / R 19x9.5J ET43 | F 20x9.0J ET37 / R 20x10.0J ET39 | F 20x9.0J ET30 / R 20x10.0J ET35 | F 21x9.5J ET28 / R 21x10.5J ET33 | F 21x9.5J ET25 / R 21x10.5J ET30 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $450-800 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: F 19x8.5J ET43 / R 19x9.5J ET43
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: F 20x9.0J ET30 / R 20x10.0J ET35
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: F 21x9.5J ET25 / R 21x10.5J ET30
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x8.5J ET43 → ~6.44″ F backspacing, R 19x9.5J ET43 → ~6.94″ R backspacing
- Flush: F 20x9.0J ET30 → ~6.18″ F backspacing, R 20x10.0J ET35 → ~6.88″ R backspacing
- Max: F 21x9.5J ET25 → ~6.23″ F backspacing, R 21x10.5J ET30 → ~6.93″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact Mercedes-Benz spec, or want a wheel built to a custom offset for your Mercedes-Benz CL65 AMG [UK]? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.
Frequently Asked Questions
What bolt pattern (PCD) does the Mercedes-Benz CL65 AMG [UK] use?
How many lug bolts does the Mercedes-Benz CL65 AMG [UK] use?
What is the center bore size on the Mercedes-Benz CL65 AMG [UK]?
What size are the factory (stock) wheels on the Mercedes-Benz CL65 AMG [UK]?
What is the biggest wheel size I can fit on my Mercedes-Benz CL65 AMG [UK] without rubbing?
What does a flush wheel fitment look like on the Mercedes-Benz CL65 AMG [UK]?
Do I need wheel spacers for my Mercedes-Benz CL65 AMG [UK]?
How do I calculate wheel backspacing for my Mercedes-Benz CL65 AMG [UK]?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Mercedes-Benz CL65 AMG [UK]?
Wheel Installation Reference: Torque, Thread & TPMS
Thread & Fastener: M14x1.5, ball-seat lug bolt.
Factory Torque Spec: 130 Nm (96 ft-lb). Sedan/coupe platforms (E-Class, CLS, SL and similar) generally use the shorter 27mm bolt at this spec.
TPMS: TPMS (Tire Pressure Monitoring System) has been federally mandated on all new light vehicles sold in the US since the 2008 model year. If your wheels use OE-style sensors, have them transferred or cloned to the new wheels at installation.
Tire Pressure: Always set tire pressure to the value on your vehicle's tire placard (driver's doorjamb or glovebox), not the max PSI printed on the tire sidewall — this is trim- and tire-size-specific and stays the same reference point when you switch to a different wheel and tire combination.
Reference data compiled from published OEM service specifications and cross-checked against independent repair sources; always confirm against your owner's manual or door-jamb placard before installation.