2016 Renault Kwid Wheels & Rims: Bolt Pattern, Offset & Sizes
Fitting Renault Kwid wheels? This page gives the 2016 Renault Kwid bolt pattern (3x100), centre bore, factory rim size and the offset range for aftermarket and forged Renault Kwid rims: the same spec sheet ANKUSI uses when machining forged wheels for this car.
Quick answer: The 2016 Renault Kwid uses a 3x100 bolt pattern with a 60.1 mm centre bore and M12x1.5 lug bolts. Factory wheels: 13x4.5J ET35. For aftermarket wheels, 14x5.5J ET30 sits flush.
Forged wheels for the 2016 Renault Kwid — drilled 3x100 with a 60.1 mm centre bore, built to the offset you choose. From $220 per wheel, made to order in 20–25 days.
Get a quote for this car
Renault Kwid (2016): 3x100 bolt pattern, 60.1mm center bore, OE 13x4.5J ET35. Forged wheel fitment specs from ANKUSI.
✓ Data check: the bolt pattern and center bore on this page match an independent fitment reference. Last reviewed September 18, 2026. How we verify
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | 13x4.5J ET35 |
| Flush Fitment | 14x5.5J at ET30 offset |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
ANKUSI Engineering Expert Advice
Because an SUV's center of gravity is already higher than a sedan's, anything added at the corners — including wheel weight — has an outsized effect on handling balance. A forged wheel lets us hit the visual stance owners want without adding the rotational mass a cast wheel of the same strength would carry.
The Renault Kwid ships from the factory on a 3x100 bolt pattern with a 60.1mm center bore and a 13x4.5J ET35 wheel. Our flush reference for the Renault Kwid is 14x5.5J ET30.; our maximum aggressive reference is 15x6J ET25. — beyond that, expect clearance issues against the fender liner without further modification.
Renault Kwid OE Wheel Specs
The Renault Kwid ships from the factory on 3x100 bolt pattern wheels with a 60.1mm center bore. The stock wheel size is 13x4.5J ET35, offering a balanced ride that suits most owners without any rubbing or clearance concerns.
Why the factory spec works for most owners:
- Balances ride comfort with steering response and highway efficiency.
- Wide tire and wheel availability at the factory diameter keeps replacement costs low.
- Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
- Guaranteed clearance against brake calipers and suspension components.
ANKUSI builds these wheels — we are the forging factory, not a reseller. For the Renault Kwid (2016) we drill the 3x100 pattern and cut the centre bore to 60.1mm on our own CNC line, so the wheel hub-centres on the car with no spacer rings, in whatever diameter, width and offset you specify.
Converting these ET figures to backspacing? Use the wheel offset and backspacing calculator.
The figures on this page are part of our open wheel fitment dataset — 10,093 vehicles, free to download, CC BY 4.0.
Offset and Backspacing: Factory Wheel vs Options
Backspacing ≈ width/2 + ET/25.4 + 0.5 in. "Inward" means closer to the suspension; "outward" means closer to the fender lip.
| Setup | Size | ET | Backspacing | Inward vs OE | Outward vs OE |
|---|---|---|---|---|---|
| Factory (OE) | 13x4.5J | ET35 | 4.13 in (105 mm) | — | — |
| Flush | 14x5.5J | ET30 | 4.43 in (113 mm) | +8 mm | +18 mm |
| Maximum | 15x6J | ET25 | 4.48 in (114 mm) | +9 mm | +29 mm |
Vehicles With the Same Hub as the Renault Kwid (3x100, 60.1 mm Bore)
No other make in our database pairs 3x100 with a 60.1 mm center bore, so wheels taken from other brands need a hub-centric ring or a custom bore.
3x100 is used by <0.1% of the vehicle pages in our English fitment guide (1 of 6,503); 100.0% of those also use a 60.1 mm center bore.
Hub-Centric Rings for a 60.1 mm Center Bore
A wheel with a center bore larger than 60.1 mm needs a hub-centric ring. The most common combinations:
| Wheel bore | Ring size |
|---|---|
| 63.4 mm | 63.4 → 60.1 mm |
| 64.1 mm | 64.1 → 60.1 mm |
| 65.1 mm | 65.1 → 60.1 mm |
| 66.1 mm | 66.1 → 60.1 mm |
| 73.1 mm | 73.1 → 60.1 mm |
ANKUSI forged wheels are bored to exactly 60.1 mm for this vehicle, so no ring is needed.
Frequently Asked Questions
What bolt pattern (PCD) does the Renault Kwid use?
How many lug bolts does the Renault Kwid use?
What is the center bore size on the Renault Kwid?
What size are the factory (stock) wheels on the Renault Kwid?
What does a flush wheel fitment look like on the Renault Kwid?
Do I need wheel spacers for my Renault Kwid?
How do I calculate wheel backspacing for my Renault Kwid?
What's the difference between wheel offset and backspacing?
Can I run staggered wheels (different sizes front and rear) on my Renault Kwid?
Sources and Last Update
Data checked against: avtoreference.com.
This record is part of the open ANKUSI Wheel Fitment Dataset (DOI 10.5281/zenodo.23241521, CC BY 4.0).
Other cars on the same factory size: 13x4.5 wheels · 13 inch wheels.
Compiled by the ANKUSI Wheels engineering team, an IATF 16949 and ISO 9001 certified forged wheel factory in Guangzhou.