Dodge Charger Daytona Bolt Pattern, Center Bore & Wheel Offset (2006–2026)
Dodge Charger Daytona wheel fitment: 5x115 bolt pattern, 71.5mm center bore (2006–2017); 5x127 bolt pattern, 71.6mm center bore (2024–2026). OE wheel sizes an
- 5x115bolt pattern (PCD), most common
- 71.5 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 6 guidesmodel years 2006–2026
Bolt pattern by generation
- 5x115, 71.5 mm center bore — 2006–2017 (4 variants)
- 5x127, 71.6 mm center bore — 2024–2026 (2 variants)
Dodge Charger Daytona wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2026 | Dodge Charger Daytona Sedan | 5x127 | 71.6 mm | 20x9.0J |
| 2024 | Dodge Charger Daytona | 5x127 | 71.6 mm | 20x9.0J |
| 2017 | Dodge Charger Daytona | 5x115 | 71.5 mm | 20x9.0J |
| 2017 | Dodge Charger Daytona 392 | 5x115 | 71.5 mm | 20x9.0J |
| 2013 | Dodge Charger Daytona | 5x115 | 71.5 mm | 20x8.0J |
| 2006 | Dodge Charger Daytona RT | 5x115 | 71.5 mm | 18x7.5J |
Forged wheels for the Dodge Charger Daytona (5x115)
Get a quote for Dodge Charger Daytona wheels
FAQ
What is the bolt pattern on a Dodge Charger Daytona?
The Dodge Charger Daytona uses a 5x115 bolt pattern on most variants we cover with a 71.5mm center bore. Other generations use 5x127 / 71.6mm (2024–2026). Always check the exact year and trim before ordering.
What is the Dodge Charger Daytona center bore?
The hub-centric center bore is 71.5 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Dodge Charger Daytona years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Dodge Charger Daytona?
Any wheel drilled 5x115 with a 71.5mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 14–24 inch diameters, so no adapters or hub rings are needed.