Toyota Tundra Bolt Pattern, Center Bore & Wheel Offset (2007–2022)
Toyota Tundra wheel fitment: 5x150 bolt pattern, 110.1mm center bore (2007–2019); 6x139.7 bolt pattern, 95.1mm center bore. OE wheel sizes and offsets for eve
- 5x150bolt pattern (PCD), most common
- 110.1 mmcenter bore
- M14x1.5 Nutwheel bolt / nut
- 8 guidesmodel years 2007–2022
Bolt pattern by generation
- 5x150, 110.1 mm center bore — 2007–2019 (7 variants)
- 6x139.7, 95.1 mm center bore — 2022 (1 variants)
Toyota Tundra wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2022 | Toyota Tundra | 6x139.7 | 95.1 mm | 18x8.0J |
| 2019 | Toyota Tundra TRD Pro | 5x150 | 110.1 mm | 18x8.0J |
| 2018 | Toyota Tundra | 5x150 | 110.1 mm | 18x8.0J |
| 2018 | Toyota Tundra TRD Sport | 5x150 | 110.1 mm | 20x8.0J |
| 2015 | Toyota Tundra TRD Pro Series | 5x150 | 110.1 mm | 18x8.0J |
| 2014 | Toyota Tundra | 5x150 | 110.1 mm | 18x8.0J |
| 2010 | Toyota Tundra | 5x150 | 110.1 mm | 18x8.0J |
| 2007 | Toyota Tundra | 5x150 | 110.1 mm | 18x8.0J |
Forged wheels for the Toyota Tundra (5x150)
Get a quote for Toyota Tundra wheels
FAQ
What is the bolt pattern on a Toyota Tundra?
The Toyota Tundra uses a 5x150 bolt pattern on most variants we cover with a 110.1mm center bore. Other generations use 6x139.7 / 95.1mm (2022–2022). Always check the exact year and trim before ordering.
What is the Toyota Tundra center bore?
The hub-centric center bore is 110.1 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Toyota Tundra years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Toyota Tundra?
Any wheel drilled 5x150 with a 110.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 17–24 inch diameters, so no adapters or hub rings are needed.