Rolls-Royce Phantom Bolt Pattern, Center Bore & Wheel Offset (2002–2024)
Rolls-Royce Phantom wheel fitment: 5x120 bolt pattern, 72.6mm center bore (2002–2016); 5x112 bolt pattern, 66.6mm center bore (2017–2024). OE wheel sizes and
- 5x120bolt pattern (PCD), most common
- 72.6 mmcenter bore
- M14x1.25 Boltwheel bolt / nut
- 23 guidesmodel years 2002–2024
Bolt pattern by generation
- 5x120, 72.6 mm center bore — 2002–2016 (15 variants)
- 5x112, 66.6 mm center bore — 2017–2024 (8 variants)
Rolls-Royce Phantom wheel specs by year and trim
Forged wheels for the Rolls-Royce Phantom (5x120)
Get a quote for Rolls-Royce Phantom wheels
FAQ
What is the bolt pattern on a Rolls-Royce Phantom?
The Rolls-Royce Phantom uses a 5x120 bolt pattern on most variants we cover with a 72.6mm center bore. Other generations use 5x112 / 66.6mm (2017–2024). Always check the exact year and trim before ordering.
What is the Rolls-Royce Phantom center bore?
The hub-centric center bore is 72.6 mm on the most common generation; see the table for variants. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Rolls-Royce Phantom years share the same wheel fitment?
No. The bolt pattern or center bore changed between generations, so wheels are not interchangeable across all years. Use the year-by-year table on this page to pick the right specification.
Which forged wheels fit the Rolls-Royce Phantom?
Any wheel drilled 5x120 with a 72.6mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 17–24 inch diameters, so no adapters or hub rings are needed.