Dacia Logan MPI Bolt Pattern, Center Bore & Wheel Offset (2005)
Dacia Logan MPI wheel fitment: 4x100 bolt pattern, 60.1mm center bore. OE wheel sizes and offsets for every Logan MPI variant we cover (2 guides), plus flush
- 4x100bolt pattern (PCD)
- 60.1 mmcenter bore
- M12x1.5 Boltwheel bolt / nut
- 2 guidesmodel years 2005
Dacia Logan MPI wheel specs by year and trim
| Year | Model / trim | Bolt pattern | Center bore | OE wheel |
|---|---|---|---|---|
| 2005 | Dacia Logan 1.4 MPI | 4x100 | 60.1 mm | 14x5.5J |
| 2005 | Dacia Logan 1.6 MPI | 4x100 | 60.1 mm | 15x6.0J |
Forged wheels for the Dacia Logan MPI (4x100)
Get a quote for Dacia Logan MPI wheels
FAQ
What is the bolt pattern on a Dacia Logan MPI?
The Dacia Logan MPI uses a 4x100 bolt pattern with a 60.1mm center bore across every Logan MPI variant in our database (2 guides, 2005).
What is the Dacia Logan MPI center bore?
The hub-centric center bore is 60.1 mm. Aftermarket wheels should match this bore or use hub-centric rings so the hub, not the bolts, carries the load.
Do all Dacia Logan MPI years share the same wheel fitment?
The bolt pattern and center bore are the same across the years we cover, but OE wheel width and offset differ by trim, so check the exact model line before choosing an aftermarket size.
Which forged wheels fit the Dacia Logan MPI?
Any wheel drilled 4x100 with a 60.1mm hub bore in the offset range shown on the model guide. ANKUSI forges wheels to order for this exact specification, in 17–24 inch diameters, so no adapters or hub rings are needed.