BMW M550d xDrive Touring (2013) Wheel Fitment
BMW M550d xDrive Touring (2013): 5x120 bolt pattern, 72.6mm center bore. Factory wheels: F: 19x8.5J R: 19x9.0J. Reference fitment ranges.
Wheel Size & Offset at a Glance
| Configuration | Wheel Size & Offset |
|---|---|
| Factory (OE) | F: 19x8.5J R: 19x9.0J |
| Flush Fitment | F 20x9.0J ET22 / R 20x10.0J ET30 |
| Maximum Aggressive | F 21x9.5J ET18 / R 21x10.5J ET25 |
How to Read Wheel Offset & Measurements
Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.
BMW M550d xDrive Touring OE Wheel Specs
The 2013 BMW M550d xDrive Touring (Wagon) uses a 5x120 bolt pattern with a 72.6mm center bore. Factory wheels are F: 19x8.5J R: 19x9.0J.
Why the factory spec works for most owners:
- Balances ride comfort with everyday fuel efficiency
- A widely used size in this segment, so tire and wheel availability stays strong
- Keeps unsprung weight low for stable, predictable handling
- Maintains clearance for the factory brake calipers and suspension components
Flush Fitment
For a flush look with minimal rubbing, F 20x9.0J ET22 / R 20x10.0J ET30 is the recommended starting point on a stock or mildly lowered BMW M550d xDrive Touring.
Maximum Aggressive Fitment
F 21x9.5J ET18 / R 21x10.5J ET25 is a more aggressive reference setup. Beyond this, expect rubbing under compression without fender rolling or camber correction.
5-Tier Configuration Options
A Factory-Style F 19x8.5J ET30 / R 19x9.0J ET44
Recommended setup: F 19x8.5J ET30 / R 19x9.0J ET44 | Economy impact: Negligible | Best for: Daily commuting, family use
Appearance: 7/10 | Comfort: 9.5/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $450-800 (wheels + tires + install)
B Comfortable Upgrade F 20x9.0J ET26 / R 20x9.5J ET37
Recommended setup: F 20x9.0J ET26 / R 20x9.5J ET37 | Economy impact: -2 to -4% | Best for: Daily / street
Appearance: 8/10 | Comfort: 9/10 | Install difficulty: ★☆☆☆☆
Estimated cost: $1,950-2,550 (wheels + tires + install)
C Balanced / Flush Fit F 20x9.0J ET22 / R 20x10.0J ET30
Recommended setup: F 20x9.0J ET22 / R 20x10.0J ET30 | Economy impact: -4 to -6% | Best for: Street
Appearance: 8.5/10 | Comfort: 8/10 | Install difficulty: ★★☆☆☆
Estimated cost: $2,600-3,400 (wheels + tires + install)
D Aggressive F 21x9.5J ET20 / R 21x10.5J ET28
Recommended setup: F 21x9.5J ET20 / R 21x10.5J ET28 | Economy impact: -6 to -9% | Best for: Show / occasional track
Appearance: 9/10 | Comfort: 6.5/10 | Install difficulty: ★★★☆☆
Estimated cost: $3,900-5,000 (wheels + tires + install)
E Max Aggressive F 21x9.5J ET18 / R 21x10.5J ET25
Recommended setup: F 21x9.5J ET18 / R 21x10.5J ET25 | Economy impact: -8 to -12% | Best for: Show only
Appearance: 9.5/10 | Comfort: 4/10 | Install difficulty: ★★★★☆
Estimated cost: $4,800-6,200+ (wheels + tires + install)
Performance Comparison Matrix
| Metric | Tier A | Tier B | Tier C | Tier D | Tier E |
|---|---|---|---|---|---|
| Wheel Spec | F 19x8.5J ET30 / R 19x9.0J ET44 | F 20x9.0J ET26 / R 20x9.5J ET37 | F 20x9.0J ET22 / R 20x10.0J ET30 | F 21x9.5J ET20 / R 21x10.5J ET28 | F 21x9.5J ET18 / R 21x10.5J ET25 |
| Economy Impact | Negligible | -2 to -4% | -4 to -6% | -6 to -9% | -8 to -12% |
| Appearance | 7/10 | 8/10 | 8.5/10 | 9/10 | 9.5/10 |
| Comfort | 9.5/10 | 9/10 | 8/10 | 6.5/10 | 4/10 |
| Install Difficulty | ★☆☆☆☆ | ★☆☆☆☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ |
| Cost Range | $450-800 | $1,950-2,550 | $2,600-3,400 | $3,900-5,000 | $4,800-6,200+ |
| Best For | Daily commuting, family use | Daily / street | Street | Show / occasional track | Show only |
Real-World Reference Cases
The examples below are compiled from typical ANKUSI customer configurations and are labeled as reference cases, not individually verified real-world builds.
Case 1: Daily Driver (Factory-Style)
Profile: Everyday driving, prioritizes comfort and low running cost.
Setup: F 19x8.5J ET30 / R 19x9.0J ET44
Cost: ~$620
Outcome: Minimal visual change, ride and fuel economy essentially unaffected.
Case 2: Balanced Enthusiast (Balanced / Flush Fit)
Profile: Wants a sportier stance without sacrificing daily usability.
Setup: F 20x9.0J ET22 / R 20x10.0J ET30
Cost: ~$3,000
Outcome: Noticeable visual upgrade, fuel economy drop within the expected range.
Case 3: Show Build (Max Aggressive)
Profile: Built primarily for shows or occasional track/show use.
Setup: F 21x9.5J ET18 / R 21x10.5J ET25
Cost: ~$5,500
Outcome: Maximum visual impact; daily comfort and fuel economy are heavily compromised, physical test fit required before production.
Decision Guide
Offset & Backspacing Reference
Backspacing is calculated as wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance):
- OE: F 19x8.5J ET30 → ~5.93″ F backspacing, R 19x9.0J ET44 → ~6.73″ R backspacing
- Flush: F 20x9.0J ET22 → ~5.87″ F backspacing, R 20x10.0J ET30 → ~6.68″ R backspacing
- Max: F 21x9.5J ET18 → ~5.96″ F backspacing, R 21x10.5J ET25 → ~6.73″ R backspacing
Want to check a different width or offset before you order? Use our Offset & Backspacing Calculator to solve the numbers yourself, or looking for your exact BMW spec, or want a wheel built to a custom offset for your BMW M550d xDrive Touring? Contact ANKUSI with your bolt pattern and offset target and we will confirm the correct forged wheel spec for your build.