Morgan Aero 8 (2015) Wheel Fitment

Morgan Aero 8 (2015): 5x114.3 bolt pattern, 67.1mm center bore, OE F 18x8.5J ET35 / R 18x10J ET35. Forged wheel fitment specs from ANKUSI.

Bolt Pattern5x114.3
Center Bore67.1mm
Wheel Load Rating700–850 kg/wheel (Performance / Sports Car segment reference)
Year2015
Category5-Lug Supercar (2-Piece)

Verified by ANKUSI's Engineering Team — IATF 16949 & ISO 9001 certified forged wheel manufacturer, TÜV/SFI/VIA compliant. See our factory & certifications →

Wheel Size & Offset at a Glance

Morgan Aero 8 wheel size and offset comparison by configuration
ConfigurationWheel Size & Offset
Flush FitmentF 19x9J ET25 / R 19x11J ET30

How to Read Wheel Offset & Measurements

Use these two references before ordering: the left diagram shows where each spec (PCD, center bore, offset, width and diameter) is measured on the wheel; the right diagram shows how positive, zero and negative offset shift the wheel face relative to the hub centerline.

Diagram showing wheel measurement points: centerline, center bore diameter, PCD, offset, rim width and diameter
Centerline, center bore, PCD, offset, width & diameter
Diagram comparing positive, zero, and negative wheel offset relative to the wheel centerline
Positive vs. zero vs. negative offset

ANKUSI Engineering Expert Advice

On a supercar, wheel weight is one of the few remaining places to cut rotational mass without touching the powertrain or chassis the factory already optimized. Forging gets there at the same structural margin as the OE wheel, which is exactly the trade a car built around outright performance rewards.

The Morgan Aero 8 ships from the factory on a 5x114.3 bolt pattern with a 67.1mm center bore and a F 18x8.5J ET35 / R 18x10J ET35 wheel. Our flush reference for the Morgan Aero 8 is F 19x9J ET25 / R 19x11J ET30.; our maximum aggressive reference is F 20x9.5J ET20 / R 20x11.5J ET25. — beyond that, expect clearance issues against the fender liner without further modification.

Morgan Aero 8 OE Wheel Specs

The Morgan Aero 8 ships from the factory on 5x114.3 bolt pattern wheels with a 67.1mm center bore. The stock wheel size is F 18x8.5J ET35 / R 18x10J ET35, offering a balanced ride that suits most owners without any rubbing or clearance concerns.

Why the factory spec works for most owners:

  • Balances ride comfort with steering response and highway efficiency.
  • Wide tire and wheel availability at the factory diameter keeps replacement costs low.
  • Lower unsprung weight than larger aftermarket wheels helps ride quality and acceleration.
  • Guaranteed clearance against brake calipers and suspension components.

Flush Fitment

For a flush look without any body modification, most Morgan Aero 8 owners run F 19x9J ET25 / R 19x11J ET30. This setup tucks the wheel face closer to the fender lip while staying within safe load and clearance limits.

Maximum Aggressive Fitment

Owners chasing a more aggressive stance push to F 20x9.5J ET20 / R 20x11.5J ET25. Adjustable sport suspension; 18-inch forged wheels; AP Racing brakes; Michelin Pilot Sport 4S (F: 225/40 R18, R: 255/35 R18). Note: Fifth and final generation of the BMW V8 powered aluminum chassis Aero sports car. Clearance should be verified before ordering, especially on lowered cars.

5-Tier Configuration Options

A – Factory-Style: 18x8.5J ET35

Recommended setup: Factory-matched forged replacement

Economy impact: None

Best for: Daily drivers, warranty-conscious owners

Appearance 5/10 | Comfort 10/10 | Install difficulty ★☆☆☆

Estimated cost range: $$ (OE replacement)

B – Comfortable Upgrade: F 18.5x9J ET30 / R 18.5x10.5J ET33

Recommended setup: Direct bolt-on, factory suspension

Economy impact: Minimal

Best for: Owners who want a mild upgrade with no compromise

Appearance 6/10 | Comfort 9/10 | Install difficulty ★☆☆☆

Estimated cost range: $$ - $$$

C – Balanced / Flush Fit: F 19x9J ET25 / R 19x11J ET30

Recommended setup: Flush forged wheels, stock or mild lowering

Economy impact: Slight increase

Best for: Enthusiasts wanting a flush look daily

Appearance 8/10 | Comfort 7/10 | Install difficulty ★★☆☆

Estimated cost range: $$$

D – Aggressive: F 19.5x9.5J ET23 / R 19.5x11.5J ET28

Recommended setup: Wider forged wheels, coilovers or lowering springs

Economy impact: Noticeable increase

Best for: Show-and-drive builds

Appearance 9/10 | Comfort 5/10 | Install difficulty ★★★☆

Estimated cost range: $$$$

E – Max Aggressive: F 20x9.5J ET20 / R 20x11.5J ET25

Recommended setup: Adjustable sport suspension; 18-inch forged wheels; AP Racing brakes; Michelin Pilot Sport 4S (F: 225/40 R18, R: 255/35 R18). Note: Fifth and final generation of the BMW V8 powered aluminum chassis Aero sports car.

Economy impact: Significant increase

Best for: Show builds, weekend cars

Appearance 10/10 | Comfort 3/10 | Install difficulty ★★★★

Estimated cost range: $$$$$

Performance Comparison Matrix

Wheel SpecTier ATier BTier CTier DTier E
Wheel Spec18x8.5J ET35F 18.5x9J ET30 / R 18.5x10.5J ET33F 19x9J ET25 / R 19x11J ET30F 19.5x9.5J ET23 / R 19.5x11.5J ET28F 20x9.5J ET20 / R 20x11.5J ET25
Economy ImpactNoneMinimalSlight increaseNoticeable increaseSignificant increase
Appearance5/106/108/109/1010/10
Comfort10/109/107/105/103/10
Install Difficulty★☆☆☆★☆☆☆★★☆☆★★★☆★★★★
Cost Range$$ (OE replacement)$$ - $$$$$$$$$$$$$$$
Best ForDaily drivers, warranty-conscious ownersOwners who want a mild upgrade with no compromiseEnthusiasts wanting a flush look dailyShow-and-drive buildsShow builds, weekend cars

Real-World Reference Cases

The following builds are compiled from typical ANKUSI customer configurations for this platform and are illustrative, not individually verified real-world builds.

Case 1: Daily Driver (Factory-Style)

Profile: Commuter prioritizing comfort and reliability.

Setup: F 18x8.5J ET35 / R 18x10J ET35 forged wheels, factory suspension.

Cost: $$ (OE replacement)

Outcome: No clearance issues, factory ride quality retained.

Case 2: Balanced Enthusiast (Balanced / Flush Fit)

Profile: Weekend driver wanting a flush stance without sacrificing daily usability.

Setup: F 19x9J ET25 / R 19x11J ET30 forged wheels.

Cost: $$$

Outcome: Flush fitment with acceptable ride comfort for daily use.

Case 3: Show Build (Max Aggressive)

Profile: Show-and-shine build prioritizing stance over comfort.

Setup: F 20x9.5J ET20 / R 20x11.5J ET25 forged wheels. Adjustable sport suspension; 18-inch forged wheels; AP Racing brakes; Michelin Pilot Sport 4S (F: 225/40 R18, R: 255/35 R18). Note: Fifth and final generation of the BMW V8 powered aluminum chassis Aero sports car.

Cost: $$$$$

Outcome: Maximum aggressive stance; clearance verified case-by-case.

Decision Guide

1. What is this car mainly used for? Daily driving favors Tier A or B; weekend/show use favors Tier D or E.
2. What is your budget? Tiers A-B keep cost low; Tiers D-E cost significantly more in wheels, tires, and possible suspension work.
3. Is fuel economy and ride comfort a priority? If yes, stay at Tier A or B; heavier, wider wheels at Tier D-E reduce efficiency and comfort.
4. Still unsure? Tier C (Balanced / Flush Fit) is the safe default for most Morgan Aero 8 owners.

Offset & Backspacing Reference

Backspacing is calculated as: wheel width (in) / 2 + offset (mm) / 25.4 + 0.5.

  • OE 18x8.5J ET35: backspacing ≈ 6.13"
  • Flush 19x9J ET25: backspacing ≈ 5.98"
  • Max 20x9.5J ET20: backspacing ≈ 6.04"

Use our offset & backspacing calculator to fine-tune your fitment, or contact ANKUSI for a custom forged wheel quote for your Morgan Aero 8.

Frequently Asked Questions

What bolt pattern (PCD) does the Morgan Aero 8 use?
The 2015 Morgan Aero 8 uses a 5x114.3 bolt pattern.
How many lug bolts does the Morgan Aero 8 use?
The Morgan Aero 8 uses a 5-lug bolt pattern (5x114.3), so you need a 5-lug forged wheel to bolt straight on.
What does a flush wheel fitment look like on the Morgan Aero 8?
For a flush look with minimal to no rubbing, we recommend F 19x9J ET25 / R 19x11J ET30 as a starting point on a stock or mildly lowered Morgan Aero 8.
Do I need wheel spacers for my Morgan Aero 8?
No. ANKUSI forges each wheel to your exact target offset, including the flush or max specs above, so you get the correct fitment without stacking spacers. Spacers are typically only used to push out an existing OE-offset wheel without replacing it, which isn't necessary when you're ordering a custom-offset forged wheel.
How do I calculate wheel backspacing for my Morgan Aero 8?
Backspacing (in inches) = wheel width (in) ÷ 2 + offset (mm) ÷ 25.4 + 0.5 (flange allowance). For example, the flush spec above works out to roughly 5.98" backspacing up front and 7.18" in the rear.
What's the difference between wheel offset and backspacing?
Offset is the distance in millimeters from the wheel's true centerline to its mounting face (positive offset pulls the wheel in, negative pushes it out). Backspacing is the distance in inches from the mounting face to the back edge of the wheel barrel. They describe the same fitment from two different reference points, which is why ANKUSI lists both above — some shops and tuning guides quote offset, others quote backspacing.
Can I run staggered wheels (different sizes front and rear) on my Morgan Aero 8?
Yes — the Morgan Aero 8's factory and our recommended flush/max fitments already use staggered sizing (different width front and rear), and ANKUSI can forge matching staggered sets to your target offsets.

← Back to the full Fitment Guide · Browse forged wheels

Contact WhatsApp Get a Quote